Bitlamp - does not stay on

EasyBuilder Pro Q&A
Bitlamp - does not stay on
none 0.0 0
1
  • HMI Model: MT8072iP
  • EasyBuilder Pro Version: latest

I have 2 bit-lamps linked directly to PLC outputs. When each PLC output is on, the bit-lamp comes on, but after 10sec it goes off again - even though each PLC Output remains on.

I previously had another bit lamp that misbehaved so I had to create a mirror. I have done the same with these 2 and it solves the problem - but it is a workaround.

One of the bit-lamps is set to blink and I notice there are hesitations in the blink pattern. Does that mean anything?

2

Hi @BrianF_NZ ,

Thank you for your question! Can you please check if this is a Weinview or Weintek model?