HMI TCP Port List

Introduction:

This post lists the TCP ports utilized for various HMI features. This will come in handy when creating firewall exceptions for HMI communication.

eMT/iE/XE/mTV/iP Series:

Feature Default Port Note
FTP Server 21 This port number can be changed within the HMI’s system settings.
Ethernet Pass-through 2000 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab, with a range of 2000 to 2100.
VNC Http & Java 80 & 5800
VNC Viewer 5900
HMI Communication 8000 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab.
EasyDiagnoser 8001
EasyPrinter 8005 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Printer/Backup Server] tab. Make sure to maintain the same configuration in EasyPrinter.
Communication between cMT/cMT X and eMT/iE/XE/mTV/iP 8010 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab. Make sure to maintain the same configuration for both the project files on the cMT/cMT X model and the eMT/iE/XE/mTV/iP model.
Search for HMI 10275
Download project through router 20248 To download the project file over the internet, ensure that the router supports virtual server or port number conversion. To change this port number, access the Download window in EasyBuilder Pro and replicate the same configuration in the HMI’s system settings.

cMT/cMT X Series:

Feature Default Port Note
FTP Server 21 This port number can be changed within the HMI’s system settings.
Project Upload / Download, System Settings 80, 443 Used in EasyBuilder Pro / UtilityManager / cMT Viewer
Ethernet Pass-through 2000 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab, with a range of 2000 to 2100.
WebView 5800
VNC Viewer 5900
HMI Communication 8000 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab.
cMT Diagnoser 8002
cMT Diagnoser 10463 Diagnoser GUI
GUI / cMT Viewer / cMT Diagnoser 10763 This port affects UAC and Trend/Event Display features.
Communication between cMT/cMT X and eMT/iE/XE/mTV/iP 8010 This port number can be changed in EasyBuilder Pro’s [System Parameter Settings] » [Model] tab. Make sure to maintain the same configuration for both the project files on the cMT/cMT X model and the eMT/iE/XE/mTV/iP model.
Search for HMI 10275

Weincloud:

Feature Default Port Note
Dashboard 80, 443, 8883
EasyAccess 2.0 443